Canon VB-M640V, Operation Manual

Page: 227 / 287

Admin T
ools
6
227
Detection S tatus for Intrusion Detection
All moving objects detected are shown with contour lines.
When [Decision Point] of a moving object larger than [Object Size (%)] enters a detection area and exceeds
[Duration (Sec)], its contour lines take on the same color as the detection area, indicating that “detected” mode has
been triggered.
Configure Operations for Triggered Detection ([Event] Tab)
Set operations to be performed upon detection of changes in a subject.
This will also explain the [Event] tab in [Auto Tracking].
(1) S pecify Operation Timing (Multiple S elections Possible)
[ON Event Operation]
When selected, the operations set in (3) are performed when “detected” mode is triggered.
[OFF Event Operation]
When selected, the operations set in (3) are performed when “detected” mode ends.
Important
After the Triggered Detection is set, please confirm that the system continues to show contour lines of the Detected Moving
Object.
Object S ize Indicator
Detection Area
Contour Lines of Detected Moving Object
Video Detection Auto Tracking
R11 R10
(1)
(3)
(4)
(2)
(3)
(4)
(5)
(6)
(5)
(6)