Canon VB-M640V, Operation Manual

Page: 219 / 287

Admin T
ools
6
219
You can check the detection status of the specified detection settings in video display area and the event display
panel (P. 234).
Configure Detection Criteria ([Detection Criteria] Tab)
Detection criteria is controlled and set in the video display area for each type of detection.

Settings Common to Each Detection Type
(1) [Detection S ettings Name]
Enter a detection name of 64 characters or less. Be sure to enter a name in [Detection Settings Name].
(2) [Area S hape]
Configure whether the detection area is a rectangle or a free-shape polygon.
Note
You cannot select [Area Shape] for camera tampering detection.
Use [Rectangular]
Configure the detection area by moving, resizing or changing the shape of the rectangle that appears in the
video display area.
Drag the area to move it, and drag the vertices to resize it.
Use [Polygonal]
Click the video display area to place a vertex for the polygon at the clicked position.
Place the vertices in order, then either click the first vertex again or double-click the last vertex to set the polygon
detection area.
10
Check the detection result.
Important
It is recommended that you configure the detection criteria in conditions as close as possible to the actual conditions in which you will
use the camera.
(1)
(2)
(3)