Canon VB-M600D Operation Manual Download Page 104

Page: 104 / 145

-10

The operations and settings that can be performed only in the Admin Viewer are explained.

Magnifying Part of the Image (Viewer
PTZ)

You can use the Viewer PTZ panel to magnify part of the

camera's image in the image display area.

Click the [Viewer PTZ] button to display the viewer PTZ

panel.

The initial status of the Viewer PTZ panel shows the

preview frame (yellow) occupying the entire image.

Adjusting the Preview Frame Size

Drag the preview frame line to make the frame smaller,

and a magnified view of the image in the frame will be

shown in the image display area.

The preview frame turns blue when you drag it.

Note

• The aspect ratio of the preview frame is always 3:4.

• The Viewer PTZ uses digital zoom, so the higher the digital

zoom ratio, the lower the quality of the image becomes.

Performing Operations and Settings as the Administrator

Preview Frame
(Magnified display area)

Center of preview
frame

Summary of Contents for VB-M600D


















































































































































Search results

Summary of Contents for VB-M600D

Reviews:

Related manuals for VB-M600D

Brands by name

Popular brands

Canon VB-M600D, Operation Manual

Search results

Summary of Contents for VB-M600D

Reviews:

Related manuals for VB-M600D

Brands by name

Popular brands