Canon VB-H610D Operation Manual Download Page 42

Page: 42 / 173

Accessing the Top Page of the Camera

From the top page of the camera, you can navigate to the

Setting Menu to configure various camera settings, launch

Admin Tools, and display the viewer to view images.

The top page of the camera appears.

(1) Language Button

Click to switch the display language.

The top page language switches to the selected

language.

(2)

etting Page (

etting Menu) Link

Click to make detailed settings. See “Chapter 5

Setting Page”.

(3) Admin Tools Link

Click to use the Admin Tools. See “Chapter 6 Admin

Tools”.

(4) Admin Viewer Link

Click to access the Admin Viewer. See “Chapter 7

Admin Viewer/VB Viewer”.

(5) VB Viewer Link

Click to access the VB Viewer. See “Chapter 7 Admin

Viewer/VB Viewer”.

User Authentication

User authentication is required to access [Setting Page],

[Admin Tools] and [Admin Viewer].

The factory default setting user name and password are:

User name: root Password: camera

(The user name “root” is the administrator account for the

camera. Connection to [Setting Page] and [Admin Tools]

is limited to the user name “root”.)

Accessing the Top Page of the Camera

Launch the web browser.

Enter the IP address you specified in the Initial

etting

Tool.

Important

This “Operation Guide” explains relevant operations using the

IP address 192.168.100.1 (factory default setting). You need to

enter the actual IP address set for the camera when following
instructions.

(1)

(2)
(3)
(4)
(5)

Important

• To ensure system security, be sure to change the

administrator password. Do not forget the new password.

• If the Administrator and an authorized user share the VB

Viewer on the same PC, it is strongly recommended that the
[Remember my credentials] checkbox be cleared.

• If the wrong user name or password is entered, you cannot

connect to the camera. Connect to the camera by entering

the correct user name and password.

• Press the reset switch to restore factory default settings if you

have forgotten the administrator password (p. 161). Note,

however, that this will reset all camera settings to factory
default settings except for time and date.

• The Admin Tools and the Admin Viewer cannot be used if an

IPv6 address is specified. Only host names are supported for

IPv6 connections.

etting Page authentication

window

Admin Tools/Admin

Viewer authentication

window

Summary of Contents for VB-H610D














































































































































































Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands

Canon VB-H610D, Operation Manual

Search results

Summary of Contents for VB-H610D

Reviews:

Related manuals for VB-H610D

Brands by name

Popular brands