Canon Vb-C60 - Ptz Network Camera Operation Manual Download Page 20

Page: 20 / 198

1-4

Accessing the Setting Menu

The various settings of the VB-C60 are specified by accessing the camera in the web browser.

First, access the top page ( P. xi).

For entry of the user name and password, see ( P. xiv).

Setting Menu

You can access each setting page and Admin Viewer from the Setting Menu.

(1) [Back to top] button

Clicking this button switches the display to the top page of the camera.

(2) [Admin Viewer] button

Clicking this button switches the display to Admin Viewer.

(3) Setting Menu

Clicking a desired button switches the display to each setting page.

Note

Once all settings are complete on the setting page, close the web browser for security

reasons.

“

B-C60” is

displayed as
the model name.

Setting Men

COP

Summary of Contents for Vb-C60 - Ptz Network Camera







































































































































































































Search results

Summary of Contents for Vb-C60 - Ptz Network Camera

Reviews:

Canon Vb-C60 - Ptz Network Camera, Operation Manual, Page: 20 / 198

Search results

Summary of Contents for Vb-C60 - Ptz Network Camera

Reviews: