1-31
Setting the Image Server, Audio Server and HTTP Server (Server)
1
1
D
etailed Settings
HTTP Server
(1) [HTTP Port]
Set the HTTP port number in a range of 80 and 1024 to 65535.
Normally [
80
](factory setting) should be used.
(2) [Global Address for the Web Page]
If a fixed global address is assigned to the camera using the NAT function of the router
(
P. 4-12), set the global address and port number here. If [
IP Address
] is selected, enter
the specified IP address in the [
IP Address
] field. If [
Host Name
] is selected, the host name
specified in [
DNS
]
under
[Network
] will be used.
Set the necessary items under [
DNS
]
(
Note
z
If the setting of [
HTTP port
] is changed, the camera may no longer become accessible
from the active browser. Check beforehand the precautions explained in "Notes" in "Setting
the Items Requiring Rebooting (Reboot Item)" (
z
If [
IP Address
] is selected under [
Global Address for the Web Page
], be sure to set both
[
IP Address (global address for the web page)
] and [
Port Number (global address for the
web page)
]. If [
Host Name
] is selected, also be sure to set [
Host Name
] under [
DNS
]
on
the [
Network
] setting page.
COP
Y
