Canon VB-C500D Operation Manual Download

Page: 146 / 160

5-20

Restore Settings

Since the VB-C500VD/VB-C500D supports various functions, it is recommended that you write

down the settings for respective functions. If you forgot the settings and want to set the camera

from the beginning, restore the factory settings first.

* For the factory settings, see P. 5-23.

Restoring the Settings from the Maintenance Page in the

Web Browser

Launch the Web browser and display the menu page from which A access various settings.

To display the Setting Menu page, you need to enter the IP address of the camera, user name

and Administrator password (

P. xiii, P . 1-8).

On the Setting Menu page, click [Maintenance].

The maintenance page appears.

Click [Exec] under [Restore Settings].

A confirmation message appears, asking if you want to restore the factory settings. To restore

the factory settings, click [

COP

Summary of Contents for VB-C500D

































































































































































Search results

Summary of Contents for VB-C500D

Reviews:

Related manuals for VB-C500D

Brands by name

Popular brands

Canon VB-C500D, Operation Manual

Search results

Summary of Contents for VB-C500D

Reviews:

Related manuals for VB-C500D

Brands by name

Popular brands