manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 87

Define default stacking in the high capacity stacker

There can be one or two high capacity stackers.

[101] High capacity stacker defaults

1. Open the Settings Editor and go to: [Preferences]

→

[Print job defaults].

[102] [Print job defaults] tab

2. Use the [Top tray - Preferred sheet order] and [Stack tray - Preferred sheet order] functions to

define the default order of the prints.
• [Front/back]: the first source file page is printed first.
• [Back/front]: the last source file page is printed first.

[103] Default sheet order

3. Use the [Top tray - Face orientation] and [Stack tray - Face orientation] functions to indicate if

the front side of the prints points up or down by default.
• [Face up]: front side of first printed sheet is visible.
• [Face down]: back side of last printed sheet is visible.

[104] Default face orientation

Define default stacking in the high capacity stacker

Chapter 5 - Define defaults

87

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands