manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 62

Learn about the printer status

Power states of theVarioPrint i-series MICR

The VarioPrint i-series MICR has four power states.
•

Active

: The printer is printing jobs, processing jobs or performing maintenance tasks.

•

Ready

: The printer is ready to accept user comments or to accept print jobs.

•

Sleep mode

: The printer reduces the energy consumption.

•

Shutdown mode

: The printer reduces the energy consumption to a next level.

Wake up the printer

When the printer is in sleep mode, you use the sleep button to wake up the printer.

[48] Sleep button

Job status colors

The vertical status bar on the dashboard, the status LED on the control panel, and the operator
attention light show the same status color. PRISMAsync Remote Manager and PRISMAsync
Remote Control display the status color remotely.

You can change the warning time or disable warnings. Choose a warning time that gives you
sufficient time to prepare new media or to remove prints to prevent a printing stop.

Learn about the printer status

62

Chapter 4 - Getting started

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands