manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 551

Icon

Description

The media is needed for scheduled or waiting jobs.

The media family of the media needs a media family calibration.

The media is loaded into a paper tray.

The media is used in a scheduled job and loaded into a paper tray.

The media family or media print mode has not been calibrated.

The job media has not defined, has not been configured correctly.

Status indicators of software updates

When the configuration of downloading and installation of software updates is enabled in the
Settings Editor, the dashboard of the control panel displays the status of the operating system
updates by symbols.

Symbol

Description

Software update is available for download

Software update downloads at specified time

Software update is being downloaded

Download of software update is paused

Download of software update failed

Software update is ready for installation

Software update installs at specified time

Software update is being installed

Installation of software update failed

Status indicators

Chapter 15 - References

551

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands