manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 536

PRISMAsync Print Server RIP (raster image processor)

PRISMAsync Print Server is the heart of the VarioPrint i-series MICR. It steers the performance,
the raster image process of the print files, and the color management. PRISMAsync Print Server
offers a seamless workflow integration for both transactional based and document based print
environments. This topic describes the RIP (raster image processor) and the page description
languages of PRISMAsync Print Server.

Page description languages

PRISMAsync Print Server offers two printing modes: transaction printing mode and document
printing mode.

Below you will find the print description languages and the RIP of both printing modes and
variable data printing.

Printing mode

Page description languages

RIP

Document printing mode

• PDF 1.8
• Optimised PDF
• PDF/X-1a:2001, PDF/X-1a:

2003, PDF/X-3:2002, PDF/
X-3:2003, PDF/X-4,

• Optimised PostScript

Adobe PDF Print Engine 4.2

Transaction printing mode

• IPDS PDF
• PDF 1.8
• Optimised PDF
• PDF/X-1a:2001, PDF/X-1a:

2003, PDF/X-3:2002, PDF/
X-3:2003, PDF/X-4,

• PCL6

SRA bundle 16 for IPDS data
Adobe PDF Print Engine 4.2
for PDF containers

Variable data printing (docu-
ment printing mode)

• PDF/VT level 1
• PPML/GA level 1 (v1.5, v2.1,

v2.2)

Adobe PDF Print Engine 4.2

Adobe PDF Print Engine (APPE)

Adobe PDF Print Engine (APPE) uses a native PDF imaging model which ensures a very high RIP
performance in combination with optimal image quality.

SRA module for transaction printing applications

The SRA (Scalable Raster Architecture) module is the IPDS implementation of PRISMAsync Print
Server. It creates a connection between the front-end applications and the printer. Transaction
print jobs can be submitted via PRISMAproduction.

Other front-end solutions, such as IBM mainframes, InfoPrint Manager, GMC PrintNet, PrintSoft
PreS, and Sefas, can be connected with PRISMAproduction. When the IPDS stream contains PDF
data, the SRA module handles two separate data routes. The PDF data are processed via the
Adobe PDF Print Engine (APPE).

PDF RIP

PRISMAsync Print Server handles the incoming PDF jobs. The PDF pre-ripping process makes it
possible to have job information available immediately after the reception of the job. Operators

PRISMAsync Print Server RIP (raster image processor)

536

Chapter 15 - References

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands