manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 423

Read color validation results

The color validation test results show if the color reproduction of the printer is according to the
selected digital print certifications or the custom defined printing condition.

Color validation tests have metrics and tolerance levels to evaluate if printed colors are close
enough to their reference colors or not. Color validation tests can also use quality levels that have
different tolerance levels for the same metric.

When the color validation test has been performed, the feedback window summarizes the test
results. To have all test details, download the color validation report.

The following example is not based on a realistic printer and print environment.

[511] Example: feedback of a color validation test

Read the quality levels

It depends on the color validation test definition which quality levels can be obtained. Per defined
color metric, at least one quality level (A) is defined. The results of the individual color metrics
determine the final quality level of the test.

Download the color validation report

You can download a detailed report in PDF and CGATS format of the performed color validation
test

Read color validation results

Chapter 12 - Print what you expect

423

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands