manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 341

Define an output profile

What is an output profile

Output profiles are elements that are part of media packs.

All media print modes have a link to one of the available output profiles.

[409] Output profiles

Status of output profiles

• [In use]: the output profile is used in a media definition.
• [Factory-defined]: the output profile is factory defined.
• [Production profile]: the name of the production profile for a composite output profile of Device

Link profile.

• [Simulation profile]: the name of the simulation profile for a composite output profile.
• [Paper simulation]: indicates if paper simulation is used for a composite output profile.

Go to the output profiles

Open the Settings Editor and go to: [Color]

→

[Output profiles].

[410] [Output profiles] tab

Edit an output profile

You can only edit output profiles that are not factory defined.
1. Select the output profile.
2. Click [Edit].

[411] [Output profiles] menu

3. Change the name and description.

Define an output profile

Chapter 11 - Manage color definitions

341

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands