manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 283

Define a media family

What is a media family

All media entries of the media catalog belong to a media family.

A media family has one or more media print modes that are also listed in the list of media
families.

[345] Media families and media print modes

A media family has the following 

status

 fields.

• [Calibration]: indicates that the [Standard] halftone is used for calibration. The VarioPrint i-

series MICR does not use other halftones.

• [Factory-defined]: the media family is factory defined or not.
• [In use]: the media family is used in a media definition or not.

Go to the media families

1. Open the Settings Editor and go to: [Media]

→

[Media families].

[346] [Media families] tab

2. To find a media family, enter a search string.

Copy a media family

When you copy a media family, the media print modes of the media family are also copied.
1. Select a media family.
2. Click [Copy media family]

Define a media family

Chapter 10 - Manage media definitions

283

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands