manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 246

Change the prints delivery for the job

The prints delivery settings can be defined during the job preparation. When jobs arrive in the list
of waiting jobs, there is time to check the prints delivery.

[291] Edit job

1. Touch the job.
2. Press [Edit].
3. On the [Output] tab, touch [Print delivery].
4. Use the [Output tray] drop-down list to select the required tray.

[292] Change the output tray

5. Use the [Sort] function to select the sorting method.

• [By set]: prints are sorted by set.
• [By page]: prints are sorted by page.

Change the prints delivery for the job

246

Chapter 8 - Document printing

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands