manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 239

Change print quality options for the job

The print quality settings are defined during the job preparation. When jobs arrive in the list of
waiting jobs, there is time to check the print quality properties.

The [Adjust image] tile gives access to the pixel-precise editor and the CMYK curve editor.

[275] Edit job

Go to the print quality properties

1. Touch the job.
2. Press [Edit].
3. On the [Output] tab, touch [Print quality].

Change the attributes of the color preset

The color preset attributes define the main color settings of the job. You can change one or more
attributes for your job. In addition, you can save the changed color preset for later reuse.

Change print quality options for the job

Chapter 8 - Document printing

239

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands