manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 235

[271] Adjust the margins

1. Press [Shift].
2. Use the [Margin shift] option in horizontal direction (

) or vertical direction ( ).

3. Touch the [Front ({0})] field to enter a value or use the - and + buttons. This value is also

displayed in the [Back side ({0})] field.

NOTE

To define only the [Back side ({0})] option, click the chain symbol to unlock the front
side and back side fields.

4. Touch [OK].

Use the [Image shift] option

The [Image shift] option shifts the entire imposition that is composed of the source file page or
pages. The maximum image shift is +/- 100 mm / 3.94".

The image shift of the front side and back side are coupled by default. To unlock the relationship,
touch the chain symbol:

Change the layout of the job

Chapter 8 - Document printing

235

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands