manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 199

Delete print jobs

You can remove print jobs before or after they are printed.

For security reasons, the system administrator can enable the E-shredding option. E-shredding
overwrites the deleted job data and prevents the data recovery of a removed job.

When the control panel shows the printed jobs, you can reprint jobs. Printed jobs can
automatically be removed by the printer after a certain storage period. When the printer does not
remove printed jobs automatically, remove these jobs manually to prevent a full system disk.

Jobs that have not been printed completely and proof prints do not come in the list of printed
jobs.

[244] Delete jobs

Function

Scheduled
jobs

Waiting jobs DocBox

Printed jobs

[Delete]

1. Go to the location of the job.
2. Tap the jobs, or use an option from the [Select] menu.
3. Touch [Delete].
4. Confirm the deletion action.

More information

Find, select, and filter jobs on page 189

Delete print jobs

Chapter 8 - Document printing

199

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands