manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 162

Job workflow in document printing mode

[202] Document print jobs

Collaterals, books, and manuals are typical applications of the 

document printing mode

. The

document printing mode fits print environments with a wide range of PDF print applications.

When the printer is in the document printing mode there are several locations from where you
can submit jobs to the printer: the remote printer driver, PRISMAprepare, PRISMAsync Remote
Manager, hotfolders, and the LPR channel.

Basic workflow

The following illustration shows the document print job workflow from the job preparation to the
delivery of the prints.

Print production

Job planning

Printed 

jobs

Scheduled 

jobs

Waiting 

jobs

DocBox

PDF

Job preparation

PRISMAprepare

PDF

Hotfolder

PRISMAsync driver

1.

Job preparation

You can use PRISMAprepare, the remote printer driver, LPR, or hotfolders to submit jobs. The
PDF documents can be created with specific graphical or office applications.

2.

Job planning

Print jobs are visible on the control panel: in the list of waiting jobs, the list of scheduled jobs,
or a DocBox folder. The job properties determine the destination of the job. Job properties
can be changed when the job arrives at the destination.

3.

Print production

The printer prints the jobs according to the job sequence in the list of scheduled jobs. Job
media are loaded in the paper trays, prints and waste are removed in time and there are

Job workflow in document printing mode

162

Chapter 8 - Document printing

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands