manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 157

[Check and print] workflow profile

Print production

Job planning

Waiting 

jobs

Scheduled 

jobs

[196] Check and print workflow profile

• The check-and-print workflow profile

fits an environment for which every
document print job needs attention.
You check the print quality and layout
setting of the first set before printing
the entire job.

• Document print jobs go to the list of

scheduled jobs.

• DocBox jobs go to the list of sched-

uled jobs.

• Only the first set of the job is printed.
• The high capacity stacker ejects the

stack after each job.

[Manual planning] workflow profile

Print production

Job planning

Waiting 

jobs

Scheduled 

jobs

[197] Manual planning workflow profile

• The manual planning workflow fits an

environment for which you want to
determine the print priority of the
document print jobs.

• Document print jobs go to the list of

waiting jobs.

• DocBox jobs go to the list of sched-

uled jobs.

• The high capacity stacker ejects the

stack after each job.

[Unattended] workflow profile

Print production

Job planning

Waiting 

jobs

Scheduled 

jobs

[198] Unattended workflow profile

• The unattended workflow profile fits

an environment for which productivi-
ty is very important.

• Document print jobs go to the list of

scheduled jobs.

• DocBox jobs go to the list of sched-

uled jobs.

• The prints get banner pages to distin-

guish the individual jobs.

• When the output trays of the high ca-

pacity stackers are linked (tray link-
ing), the second high capacity stacker
is filled automatically when the first
high capacity stacker is full. Each
high capacity stacker ejects the stack
according to its configured maximum
stack height and minimum filling
rate.

Learn about workflow profiles

Chapter 8 - Document printing

157

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands