manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 139

Define the attributes of an PCL transaction setup

Define the transaction setup attributes

A transaction setup with the status [Opened], can be adjusted.
1. Open the Settings Editor and go to: [Transaction printing]

→

[Transaction setups].

[171] [Transaction setups] tab

2. Check that the transaction setup you want to change has the status: [Opened].
3. Click the [PCL transaction setup] tab.

[172] [PCL transaction setup] tab

4. Change the attributes one by one or click [Edit] in the title bar to adjust the attributes of a

group in one dialog.

5. Validate the transaction setup.
6. Make sure that you reload a transaction setup that is active when you made the changes.

Define the PCL attributes

[173] PCL transaction setup attributes

[Data resolution]

Select the resolution of the bitmaps the printer accepts.

[PCL] attributes

Description

[Use default tray-to-tray
mechanism]

In [Tray to tray] mode, a default tray mapping table can be used.
You cannot change the contents of this table.

4

Define the attributes of an PCL transaction setup

Chapter 7 - Transaction printing

139

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands