manualshive.com logo in svg

Canon VarioPrint 6000 Series, Operation Manual

The Canon VarioPrint 6000 Series Operation Manual is a comprehensive guide for users seeking to optimize the performance of their printer. Available for free download from manualshive.com, this manual provides step-by-step instructions and troubleshooting tips, ensuring seamless operation and maximizing the printer's capabilities.

Share
Download
background image

Print the Jobs in a DocBox

Print a Non-Urgent Job from the DocBox

Introduction

You can print jobs from the DocBox in two ways:
• Without urgency

The system sends the print job to the bottom of the list of [Scheduled jobs].

• With urgency (immediately)

The system sends the print job to the top of the list of [Scheduled jobs]. The job currently
active is put on hold.

Procedure

1.

On the control panel, touch [Jobs] -> [DocBox].

2.

Touch the DocBox that contains the job you want to print.

3.

Touch the desired job.

4.

Touch [Print] to print the non-urgent job.

Print the Jobs in a DocBox

Chapter 8 - Plan the jobs

163

VarioPrint 6000 line

Summary of Contents for VarioPrint 6000 Series



































































































































































































































































































































































Reviews:

No comments

Related manuals for VarioPrint 6000 Series

Brands by name

Popular brands

Load more brands