Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series
Service Guide
April 2021
Revision 1
Page 28
2. DFS30-N Tape Binder eLearning Course
To service the DFS30-N Tape Binder with the varioPRINT 6000 TITAN
Series machines, service technicians must complete the Finishing
Equipment (DFS-30) Tape Binder online training course.
Table 21 – Additional Accessory Training Courses
Module Name
Course Code
Finishing Equipment [DFS-30] Tape Binder Online Training
21DDSFEDFS30O
Item Numbers and Part Numbers are subject to change without notice.
3. BLM 550+ Training
a. Learning Path for New Service Technicians
The learning path for a new Technician is a comprehensive blended
learning program, which will prepare the new service technician to
setup and service the . The online course module, available
on the Service Training Solutions section of the
provides technicians with the theoretical concepts to install, configure,
and support the Booklet Maker. The 5-day Hardware
classroom courses blends the information taught online with hands-
on, practical training in the classroom and lab.
Table 22 – Required Courses for New Technicians
Course Name
Course Code
Plockmatic BLM500/550/550+ Online Training
19DDSBLM500O
Plockmatic BLM500/550/550+ Classroom
19DDSBLM501C
Item Numbers and Part Numbers are subject to change without notice.
b. Learning Path for BLM500/550 Trained Service Technicians
Service technicians that completed the Plockmatic BLM500/550
Training Program must take the Update course online. See
the Service Training Solutions site for offerings at the Service Training
Solutions section of the
Table 23 – Online Course Module for BLM500/BLM550 Certified
Technicians
Course Name
Course Code
Plockmatic Update Online Training
19IPCBLM5P00O
Item Numbers and Part Numbers are subject to change without notice.