Canon varioPRINT 135 Series Operation Manual Download Page 255 | Manualshive

Page: 255 / 454

background image

Use the Address List File (ral.csv)

Introduction

If an LDAP server is not available, you must use a remote address list file (ral.csv) for scan to
email. This file must contain the unique user codes and matching email addresses. The
PRISMAsync controller stores the address list file. Proceed as follows:
1. Download the file via the Settings Editor ([Configuration] -> [Connectivity], scroll down to the

[LDAP] section -> [Download address list file]).

2. Edit the file in Microsoft

®

Excel

®

, for example.

3. Upload the file via the Settings Editor ([Configuration] -> [Connectivity], scroll down to the

[LDAP] section -> [Upload address list file]).

Syntax of the Address List File

The address list file must contain a header line (mandatory) and at least one line with an email
recipient.

A "," or ";" separates the items in a record.

<CR> or <LF> separates records.

The header record shows the fields that the address list uses (ruid,address,comment).

A profile record contains the unique user codes and matching email addresses. ruid and address
are mandatory. comment is optional.

Record Items

Record items

Record item

Description

ruid

A unique user code, for example an employee number or tele-
phone number.
Maximum 20 digits. Leading zeros are allowed.

address

The email address that matches the user code.
Maximum 40 characters. Do not use the characters <CR>, <LF>, ","
and ";".

comments

Additional information, if required.

NOTE

Do not change the header information.

Examples of Correct Profiles

• 01234,[email protected]
• 56789,[email protected]

Use the Address List File (ral.csv)

254

Chapter 8 - Carry Out Scan Jobs

Canon varioPRINT 135 Series

«
...
253
254
255
256
257
...
»

Summary of Contents for varioPRINT 135 Series







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for varioPRINT 135 Series

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands