manualshive.com logo in svg

Canon varioPRINT 110, Operation Manual

The Canon varioPRINT 110 is a cutting-edge printing solution that combines exceptional performance with advanced features. Enhance your printing experience with the comprehensive Operation Manual, available for download free of charge from manualshive.com. Easily access detailed instructions and optimize your usage of this remarkable product.

Share
Download
background image

Setting

Values

Description

[Folding]

[None]

[Z-fold]

Required output location for Z-folded A4R, LetterR
and Legal:
• Folder output tray, or
• Any output tray of the stacker/stapler.

NOTE

Z-folded A3, B4 and Tabloid 11" x 17"
sheets must be sent to the stacker/
stapler.

[Z-fold large sheets
only]

Required output location for Z-folded A3, B4 and
Tabloid 11" x 17": Any output tray of the stacker/
stapler.

[Tri-fold in]

Required output location: Folder output tray

[Tri-fold out]

Required output location: Folder output tray

[Parallel fold]

Required output location: Folder output tray

[Print method]

Use the [Print method] option to define on which
side to print:
• [Print inside]
• [Print outside]

Check the preview for the result of the selection.

[Output] Settings - [Trimming]

This option is only available when you have a trimming unit connected.

Description of the Copy Job Settings

Chapter 7 - Carry Out Copy Jobs

231

Canon varioPRINT 135 Series

Summary of Contents for varioPRINT 110







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for varioPRINT 110

Brands by name

Popular brands

Load more brands