manualshive.com logo in svg

Canon varioPRINT 110, Operation Manual

The Canon varioPRINT 110 is a cutting-edge printing solution that combines exceptional performance with advanced features. Enhance your printing experience with the comprehensive Operation Manual, available for download free of charge from manualshive.com. Easily access detailed instructions and optimize your usage of this remarkable product.

Share
Download
background image

[Output] Settings - [Shift]

Setting

Values

Description

[Shift]

[Margin shift]

Use this setting to increase or decrease the mar-
gin. By default, the values of the front side and the
back side are interlocked. This means that the val-
ues for the front side and the back side remain
identical.
Widening the margin can be useful if you want to
staple or punch the output, for example. Narrow-
ing the margin can be useful if you do not need
additional space for stapling or punching the out-
put, for example.
If you want to define a different value for each
side, press  . The icon changes to the unlocked sta-
tus. Now you can define the values for the front
side and the back side separately.

[Image shift]

Use this setting to shift the image horizontally or
vertically. By default, the values of the front side
and the back side are interlocked. This means that
the values for the front side and the back side re-
main identical.
If you want to define a different value for each
side, press  . The icon changes to the unlocked sta-
tus. Now you can define the values for the front
side and the back side separately.

Description of the Copy Job Settings

226

Chapter 7 - Carry Out Copy Jobs

Canon varioPRINT 135 Series

Summary of Contents for varioPRINT 110







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for varioPRINT 110

IBM C-1 Customer Engineering Reference Manual preview
C-1
Brand: IBM Pages: 57
QWINT MSR742-I Installation Instructions Manual preview
MSR742-I
Brand: QWINT Pages: 33

Brands by name

Popular brands

Load more brands