manualshive.com logo in svg

Canon varioPRINT 110, Operation Manual

The Canon varioPRINT 110 is a cutting-edge printing solution that combines exceptional performance with advanced features. Enhance your printing experience with the comprehensive Operation Manual, available for download free of charge from manualshive.com. Easily access detailed instructions and optimize your usage of this remarkable product.

Share
Download
background image

Create a Hotfolder Default Ticket ('default_ticket.jdf')

Introduction

Hotfolders are primarily aimed at recurring PDF workflows. In these workflows identical PDFs, or
other printable files, with identical settings are printed on a regular basis. A hotfolder default
ticket ('default_ticket.jdf') in the hotfolder determines the settings for the print jobs. The name of
the hotfolder default ticket must not be changed, otherwise it will not be used in the hotfolder.

NOTE

If you want to use the hotfolder default ticket, make sure that the [Overrule the job ticket] setting

of the automated workflow in which the hotfolder was created, is disabled (no check mark in the

checkbox). Otherwise, the settings of the automated workflow overrule the settings of the

hotfolder default ticket.

Procedure

NOTE

This procedure is an example of the procedure on a Microsoft

®

 Windows

®

 XP operating system.

For other operating systems, the procedure can vary.

1.

Click Start - Settings - Printers and Faxes.

2.

Right-click the printer driver of your printer and select Printing Preferences.

3.

Define the required settings.

4.

Click the [Save] icon in the Templates bar.

5.

Enter a name for the template.

6.

Click [OK].

7.

Right-click the template you just created and select 'Save as ticket'.

8.

Browse to the shared network folder and click [Save].
The template is saved as a hotfolder default ticket.
Do not change the name of the hotfolder default ticket ('default_ticket.jdf').

Create a Hotfolder Default Ticket ('default_ticket.jdf')

Chapter 6 - Carry Out Print Jobs

189

Canon varioPRINT 135 Series

Summary of Contents for varioPRINT 110







































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for varioPRINT 110

Brother AX-325 Owner'S Manual preview
AX-325
Brand: Brother Pages: 16
Royal Portable User Manual preview
Portable
Brand: Royal Pages: 24

Brands by name

Popular brands

Load more brands