Canon TS9500 Series Online Manual Download Page 521

Page: 521 / 540

1003

Cause

Possible causes include the following.

• There is no paper in the cassette.
• Paper is not loaded in the cassette properly.

What to Do

Take the corresponding actions below.

• Load paper in the cassette.

Loading Paper in the Cassette

• Align the paper guides with the both edges of the paper when you load paper in the cassette.

• Set paper information for the paper in the cassette.

After carrying out the above measures, select

on the touch screen.

Note

• Once the cassette is inserted, the screen for setting cassette paper information appears. Set paper

information for the paper in the cassette.

• The loadable paper differs depending on the paper source.

The loadable paper in the cassette is A4, Letter, A5, or B5 size plain paper.

• To cancel printing, tap

Stop

on the touch screen.

521

Summary of Contents for TS9500 Series





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for TS9500 Series

Reviews:

Brands by name

Popular brands

Canon TS9500 Series, Online Manual

Search results

Summary of Contents for TS9500 Series

Reviews:

Brands by name

Popular brands