manualshive.com logo in svg

Canon TS9000 series, Online Manual, Page: 75 / 466

Share
Download
Canon TS9000 series Online Manual Download Page 75

Inserting the Memory Card

Important

• When a memory card is inserted into the card slot, the 

Access

 lamp is lit. When the 

Access

 lamp is

flashing, the printer is accessing the memory card. In this case, do not touch the area around the card
slot.

Note

• When 

Read/write attribute

 is set to 

Writable from USB PC

, you cannot print image data from the

memory card using the operation panel of the printer. After using the card slot as the memory card drive
of a computer, remove the memory card, select 

Device user settings

 in 

Device settings

, then set

Read/write attribute

 to 

Not writable from PC

.

Setting Up Card Slot as Memory Card Drive of Computer

• When you use a computer to edit or enhance photos saved on a memory card, be sure to print them

from the computer. If you use the operation panel, the photos may not be printed properly.

1. Prepare your memory card.

Attach a special card adapter if your memory card requires one.

Before Inserting the Memory Card

2. Turn on the power.

3. Insert the memory card into the card slot.

Insert your memory card straightforward WITH THE LABELED SIDE FACING UP into the card slot.

When the memory card is inserted properly, the 

Access

 lamp (A) will light up.

* Be sure to attach the card adapter to the following types of memory card before inserting to the card
slot.

• miniSD Card, miniSDHC Card
• microSD Card, microSDHC Card

75

Summary of Contents for TS9000 series



















































































































































































































































































































































































































































































Reviews:

No comments