Canon TS9000 series Online Manual Download Page 253

Page: 253 / 466

Copying Label Side of Disc

You can copy the label of an existing BD/DVD/CD and print it on a printable disc.

Important

• You cannot print on 3.15 inches / 8 cm printable discs.

• Do not attach the disc tray or place the printable disc until the message asking you to set them is

displayed. Doing so can damage the printer.

Make sure printer is turned on.

2. Select

Copy

on the HOME screen.

Using the Operation Panel

3. Select

Disc label

The print area setting screen is displayed.

4. Specify print area.

A. Specify the outer circle.

B. Specify the inner circle.

Note

• Measure the outer and inner diameters of the printing surface of the printable disc and make sure

you set a value smaller than the measured value for the outer diameter, and a value larger than
the measured value for the inner diameter.

• For information on printable discs, contact their manufacturers.

5. Specify the amount of ink.

If the print result is blurry, select

Bleed-proof

. Blurring may be reduced by printing with less ink.

253

Summary of Contents for TS9000 series



















































































































































































































































































































































































































































































Search results

Summary of Contents for TS9000 series

Reviews:

Brands by name

Popular brands

Canon TS9000 series, Online Manual

Search results

Summary of Contents for TS9000 series

Reviews:

Brands by name

Popular brands