Canon TS7450i Series Online Manual Download Page 59

Page: 59 / 455

D: Help menu

Help Menu

Items on Canon Wi-Fi Connection Assistant Screen Toolbar

This section describes items on

Canon Wi-Fi Connection Assistant

Screen toolbar.

A: Perform wired or Wi-Fi setup.

Note

• This item has the same function as

Network Settings...

in the

Printer Settings

menu.

B: Redetects printers.

Note

• This item has the same function as

Update

in the

View

menu.

C: Stops detecting printers.

Note

• This item has the same function as

Cancel

in the

View

menu.

D: Switches the printer list. (IPv4, IPv6, or USB printers)

Note

• This item has the same function as

Switch View

in the

View

menu.

• You can also display the USB connected printer list. (Not available for some models.) In this

case, select

USB

E: Displays this guide.

Note

• This item has the same function as

Online Manual

in the

Help

menu.

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 59 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: