Canon TS7450i Series Online Manual Download Page 58

Page: 58 / 455

Appears if the printer is used by IP address specified automatically.

•

Manual

•

Appears if the printer is used by IP address specified manually.

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

H: MAC Address

Displays the MAC address of the detected printer.

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

I: Device Name

Displays the printer device name if it is registered.

Note

• If

USB

is selected from the pulldown menu on the toolbar, nothing is displayed.

• The printer with

Requires Setup

displayed on

Status

is not displayed.

Assigning Printer Information

J: IPv6

appears when an IPv6 address is assigned for the printer.

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

•

K: Displays the printer status and operation guides.

Selecting a printer from the printer list displays its current status and what to do next.

Menus on Canon Wi-Fi Connection Assistant Screen

This section describes menus on

Canon Wi-Fi Connection Assistant

screen.

A: Printer Settings menu

Printer Settings Menu

B: View menu

View Menu

C: Option menu

Option Menu

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 58 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: