Canon TS7450i Series Online Manual Download Page 425

Page: 425 / 455

1000

Cause

Possible causes include the following.

• There is no paper in the rear tray.
• Paper is not loaded in the rear tray properly.

What to Do

Take the corresponding actions below.

• Load paper in the rear tray.

•

Loading Plain Paper / Photo Paper in Rear Tray

• Align the paper guides of the rear tray with both edges of the paper.

•

• Close the feed slot cover.

•

After carrying out the above measures, press the printer's

button to cancel the error.

Note

• To cancel printing, press the printer's

Stop

button.

425

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 425 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: