Canon TS7450i Series Online Manual Download Page 319

Page: 319 / 455

Note

•

Zoom

rescans the document and displays high-resolution image in Preview.

•

(Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the

resolution of the displayed image will be low.

Preview

Performs a trial scan.

Scan

Starts scanning.

Note

• When scanning starts, the progress appears. To cancel the scan, click

Cancel

• When scanning is completed, a dialog box prompting you to select the next action may appear.

Follow the prompt to complete. For details, refer to

Status of ScanGear dialog after scanning

Scan

Tab (

Preferences

dialog box).

• It will take time to process the images if the total size of the scanned images exceeds a certain

size. In that case, a warning message appears; it is recommended that you reduce the total size.
To continue, scan in whole image view.

Preferences...

Displays the

Preferences

dialog box for making scan/preview settings.

Close

Closes ScanGear (scanner driver).

(2) Toolbar

Adjust or rotate preview images. The buttons displayed on the Toolbar vary by view.

319

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 319 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: