Canon TS7450i Series, Online Manual, Page: 192 / 455

Other device settings
Select this setting item from Device settings in the menu screen which appears when you press the OK
button.
• Key repeat •
When you select ON , numbers, characters and other choices can be displayed quickly by pressing the
holding the button when you are entering the characters etc.
• ECO settings •
ECO settings
• Quiet setting •
Quiet setting
• Original removal reminder •
Selects whether the printer will display the reminder screen in case you forget to remove the original
from the platen after scanning.
Important
• Depending on the type of original or the state of the document cover, forgetting to remove the •
original may not be detected.
• Status bar settings •
Change the display of the status bar.
◦ Advanced mode ◦
Enables or disables the status bar display.
When Disable is selected, only the left end of the status bar will light up or flash.
◦ Brightness ◦
Adjusts the brightness of the status bar.
• Wi-Fi pairing settings •
In order to connect Canon PRINT Inkjet/SELPHY, multiple configurations will be performed.
◦ Enable/disable pairing ◦
Set the printer's Wi-Fi pairing function to enable or disable.
◦ Allow/block additional pairing ◦
On another function permit or prohibit Canon PRINT Inkjet/SELPHY pairing.
◦ Delete paired devices ◦
Cancel all Canon PRINT Inkjet/SELPHY pairing.
192