Canon TS7450i Series Online Manual Download Page 105

Page: 105 / 455

Checking Ink Status on the LCD

Check that printer is turned on.

Press the

button.

Select

Estimated ink levels

A symbol appears in the area A if there is any information about the remaining ink level.

The ink is running low. Prepare a new FINE cartridge.

Ink has run out. Replace the FINE cartridge with a new FINE cartridge.

This appears when remaining ink level is not known.

Note

• The above screen shows estimated ink levels.

•

• Select

Order ink now

and press the

button to display the QR code and access the ink

•

purchasing site. Cost of connecting to Internet is to be born by the customer.

• You can check the ink numbers by selecting

Ink model number

•

• You can also check the ink status on the computer screen.

•

For Windows:

Checking Ink Status from Your Computer

For macOS:

Checking Ink Status from Your Computer

105

Summary of Contents for TS7450i Series








































































































































































































































































































































































































































































Search results

Summary of Contents for TS7450i Series

Reviews:

Canon TS7450i Series, Online Manual, Page: 105 / 455

Search results

Summary of Contents for TS7450i Series

Reviews: