Canon TS7400 Series Online Manual Download Page 57

Page: 57 / 454

Appears if the printer is used by IP address specified automatically.

•

Manual

Appears if the printer is used by IP address specified manually.

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

H: MAC Address

Displays the MAC address of the detected printer.

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

I: Device Name

Displays the printer device name if it is registered.

Note

• If

USB

is selected from the pulldown menu on the toolbar, nothing is displayed.

• The printer with

Requires Setup

displayed on

Status

is not displayed.

Assigning Printer Information

J: IPv6

appears when an IPv6 address is assigned for the printer.

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

K: Displays the printer status and operation guides.

Selecting a printer from the printer list displays its current status and what to do next.

Menus on Canon IJ Network Device Setup Utility Screen

This section describes menus on

Canon IJ Network Device Setup Utility

screen.

A: Printer Settings menu

Printer Settings Menu

B: View menu

View Menu

C: Option menu

Option Menu

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands