Canon TS7400 Series Online Manual Download Page 424

Page: 424 / 454

1000

Cause

Possible causes include the following.

• There is no paper in the rear tray.
• Paper is not loaded in the rear tray properly.

What to Do

Take the corresponding actions below.

• Load paper in the rear tray.

Loading Plain Paper / Photo Paper in Rear Tray

• Align the paper guides of the rear tray with both edges of the paper.

• Close the feed slot cover.

After carrying out the above measures, press the printer's

button to cancel the error.

Note

• To cancel printing, press the printer's

Stop

button.

424

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands