Canon TS7400 Series Online Manual Download Page 154

Page: 154 / 454

Front View

A: Paper Support

Extend to load paper in the rear tray.

B: Rear Tray Cover

Open to load paper in the rear tray.

C: Paper Guides

Align with both sides of the paper stack.

D: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

E: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Plain Paper / Photo Paper in Rear Tray
Loading Envelopes in Rear Tray

F: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

Loading Plain Paper in Cassette

G: Paper Guides

Align with right/left/front sides of the paper stack.

H: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

I: Paper Output Support

Open to support ejected paper.

154

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands