Canon TS7400 Series Online Manual Download Page 110

Page: 110 / 454

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.

Replace the FINE

cartridge

whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper

Check that printer is turned on.

Load a sheet of A4 or Letter-sized plain paper in the cassette.

Loading Plain Paper in Cassette

Press the

button.

Select

Maintenance

Select

Nozzle Check

The confirmation screen will appear.

Select

Yes

Press the

button.

The nozzle check pattern will be printed and two pattern confirmation screens will appear on the LCD.

Select

Next

Examine the nozzle check pattern

110

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands