Canon TS700 Series Online Manual Download Page 407

Page: 407 / 428

1003

Cause

Possible causes include the following.

• There is no paper in the cassette.
• Paper is not loaded in the cassette properly.

What to Do

Take the corresponding actions below.

• Load paper in the cassette.

Loading Paper in the Cassette

• Align the paper guides with the both edges of the paper when you load paper in the cassette.

• Set paper information for the paper in the cassette.

After carrying out the above measures, press the printer's

button.

Note

• Once the cassette is inserted, pull out the paper output tray until it stops. If it is not pulled out enough

and you start printing, an error may occur.

• The loadable paper differs depending on the paper source. The loadable paper in the cassette is A4,

Letter, A5, or B5 size plain paper.

• To cancel printing, press the printer's

Stop

button.

407

Summary of Contents for TS700 Series













































































































































































































































































































































































































































Search results

Summary of Contents for TS700 Series

Reviews:

Related manuals for TS700 Series

Brands by name

Popular brands

Canon TS700 Series, Online Manual

Search results

Summary of Contents for TS700 Series

Reviews:

Related manuals for TS700 Series

Brands by name

Popular brands