Canon TS6420a Online Manual Download Page 381

Page: 381 / 439

Cannot Communicate with Printer via USB

Check1

Make sure printer is turned on.

Check2

Connect USB cable properly.

As the illustration below, the USB port is at the back of the printer.

Important

• Check the orientation and insertion angle of the "Type-B" connector and connect to the printer. The USB

Port is slightly diagonal. For details, refer to the instruction manual supplied with the USB cable.

Check3

Make sure

Enable bidirectional support

is selected in the

Ports

sheet of the

Printer properties

dialog box. (Windows)

If not, select it to enable bidirectional support.

Opening Printer Driver's Setup Screen

381

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6420a

Reviews:

Canon TS6420a, Online Manual, Page: 381 / 439

Search results

Summary of Contents for TS6420a

Reviews: