Canon TS6420a Online Manual Download Page 160

Page: 160 / 439

Changing the Print Options

You can change the detailed printer driver settings for print data that is sent from an application software.

Check this check box if part of the image data is cut off, the paper source during printing differs from the
driver settings, or printing fails.

Open the

printer driver setup window

Click

Print Options...

on the

Page Setup

tab

The

Print Options

dialog box opens.

Change the individual settings

If necessary, change the setting of each item, and then click

The

Page Setup

tab is displayed again.

160

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6420a

Reviews:

Canon TS6420a, Online Manual, Page: 160 / 439

Search results

Summary of Contents for TS6420a

Reviews: