Canon TS6400 Series Online Manual Download Page 60

Page: 60 / 439

Performing/Changing Wired LAN Connection (Ethernet Cable)
Settings

Follow the procedure below to perform/change wired LAN settings.

Note

• For some models, you can perform network setup for a USB connected printer using IJ Network Device

Setup Utility. Select

USB

Switch View

under the

View

menu to display printers for which you can

perform setup.

Start up IJ Network Device Setup Utility.

Check the displayed message and select

Yes

Select

Printer Network Setup

on the displayed screen.

Detected printers are listed.

Select printer to perform/change settings from printer list.

Select the printer with

Wired LAN

displayed on

Connection Method

and

Available

displayed on

Status

to perform settings.

You can perform settings for a printer with

Available

not displayed on

Status

via USB connection.

To perform setup for a USB connected printer, select

USB

from the pulldown menu on the toolbar and

select the printer to perform/change settings.

Select

Network Settings...

Printer Settings

menu.

The

Confirm Printer Password

screen appears.

For more on the password, refer to Administrator Password.

Note

• Clicking the

icon allows you to perform/change settings.

• If you select a USB connected printer on step 4, the screen below appears after the

Confirm

Printer Password

screen appears

Select

Wired LAN

and click

Enter password and click

The

Network Settings

screen appears.

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands