manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 426

2113

Cause

Paper settings specified when printing/copying do not match either the rear tray or the cassette paper
information registered on the printer.

Note

• For the appropriate combination of the paper settings specified on the printer driver and the paper

information registered on the printer, refer to the following.

Paper Settings on the Printer Driver and the Printer (Media Type)

 (Windows)

Paper Settings on the Printer Driver and the Printer (Paper Size)

 (Windows)

• For copying, make the paper settings for copying match either the rear tray or the cassette paper

information registered on the printer.

• For how to register paper information on the printer, refer to the following.

Paper Settings

If the paper source is set to be selected automatically and the paper settings specified when printing differ
from either the rear tray or the cassette paper information registered on the printer, the following message
appears on the printer's LCD.

• Paper settings specified on the printer driver when printing:

Paper size: 

A5

Media type: 

Plain paper

• Paper information for the rear tray and the cassette registered on the printer:

Paper size: 

A4

Media type: 

Plain paper

What to Do

Press the printer's 

OK

 button to display the screen below.

426

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands