manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 400

Paper Is Jammed inside Printer

If the jammed paper tears and you cannot remove the paper from the paper output slot or the feed slot, or if
the jammed paper remains inside the printer, remove the paper following the instructions below.

Note

• If paper becomes jammed during printing and you need to turn off the printer to remove it, press the

printer's 

Stop

 button to stop the printing before you turn off the printer.

1.

Turn off the printer and unplug it.

2.

Open scanning unit / cover.

Important

• Do not touch clear film (A) and white belt (B).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

3.

Check if jammed paper is under FINE cartridge holder.

If the jammed paper is under the FINE cartridge holder, move the FINE cartridge holder to the far right or
left, whichever makes it easier to remove the paper.

When moving the FINE cartridge holder, hold the top of the FINE cartridge holder and slide it slowly to
the far right or left.

400

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands