Canon TS6400 Series Online Manual Download Page 353

Page: 353 / 439

Ink Does Not Come Out

Check1

Make sure of the estimated ink levels in the FINE cartridges.

When a FINE cartridge runs out of ink, replace empty FINE cartridges with a new one.

Checking Ink Status on the LCD
Replacing a FINE Cartridge

Check2

Is the FINE cartridge installed properly?

• Check that there is no orange tape left on the FINE cartridge.

If the orange tape remains on the FINE cartridge, peel it off.

• If you do not close the ink cartridge locking cover correctly, ink may not be ejected correctly.

Open the scanning unit / cover to open the ink cartridge locking cover, and then close it.

Press down the ink cartridge locking cover until it clicks into place.

Check3

Are the print head nozzles clogged?

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.

Step1

Print the nozzle check pattern.

After printing the nozzle check pattern, examine the pattern.

•

For Windows:

Printing a Nozzle Check Pattern

•

For macOS:

Printing a Nozzle Check Pattern

If the pattern is not printed correctly, go to the next step.

Step2

Clean the print head.

353

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands