manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 333

Check7

 Make sure channel set on wireless router is a usable channel as confirmed in

the previous check.

If it is not, change the channel set on the wireless router.

Check8

 Make sure security software's firewall is off.

If your security software's firewall is on, a message may appear warning you that Canon software is attempting
to access the network. If this warning message appears, set security software to always allow access.

If you are using any programs that switch between network environments, check their settings. Some
programs use a firewall by default.

Check9

 If printer is connected to an AirPort Base Station via LAN, make sure you use

alphanumeric characters for network name (SSID). (macOS)

If the problem is not resolved, click here and redo setup.

•

Positioning:

Make sure there are no obstacles between the printer and the wireless router.

Cannot Connect to a Printer through Wireless Direct

Check1

 Check printer settings.

Select 

Device settings

 > 

LAN settings

 > 

Wireless Direct

 > 

Advanced mode

 in this order and enable it.

Check2

 Check the settings of your device (smartphone/tablet).

Make sure Wi-Fi is enabled on your device.

For details, refer to your device's instruction manual.

Check3

 Make sure printer is selected as connection for device (e.g. smartphone or

tablet).

Select the network name (SSID) for Wireless Direct specified for the printer as the connection destination for
devices.

Check the destination on your device.

For details, refer to your device's instruction manual or visit the manufacturer's website.

To check the network name (SSID) for Wireless Direct specified for the printer, display it using the operation
panel of the printer or print out the network setting information of the printer.

• Display on the LCD.

LAN settings

• Print the network settings.

333

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands