Canon TS6400 Series Online Manual Download Page 291

Page: 291 / 439

Scanning in Basic Mode

Use the

Basic Mode

tab to scan easily by following these simple on-screen steps.

To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time
with ScanGear (Scanner Driver).

When scanning from the ADF (Auto Document Feeder), preview is not available.

Important

• The following types of documents may not be scanned correctly. In that case, click

(Thumbnail)

on the Toolbar to switch to whole image view and scan.

Photos with a whitish background
Documents printed on white paper, hand-written text, business cards, and other unclear

documents

Thin documents
Thick documents

• The following types of documents cannot be scanned correctly.

Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to irregular shapes

Note

• Both sides of a two sided document can be scanned simultaneously on models with ADF duplex

scanning support.

Place document on machine's Platen or ADF, and then start ScanGear (scanner driver).

Positioning Originals (Scanning from Computer)

Starting ScanGear (Scanner Driver)

Set

Select Source

to match your document.

291

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands