manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 176

Advanced

•

Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.

• You cannot use a hyphen for the initial or last character of the printer name.

•

TCP/IP settings

Performs IPv4 or IPv6 setting.

•

WSD setting

Setting items when you use WSD (one of the network protocols supported in Windows).

◦

Enable/disable WSD

Selects whether WSD is enabled or disabled.

Note

When this setting is enabled, the printer icon is displayed on the Network Explorer in

Windows.

◦

Optimize inbound WSD

Selecting 

Enable

 allows you to receive the WSD printing data faster.

◦

Timeout setting

Specifies the timeout length.

•

Bonjour settings

Setting items when you use Bonjour.

◦

Enable/disable Bonjour

Selecting 

Enable

 allows you to use Bonjour to perform the network settings.

◦

Service name

Specifies the Bonjour service name. You can use up to 48 characters for the name.

Note

You cannot use the same service name as that already used for other LAN connected

devices.

•

LPR protocol setting

Enables/disables the LPR setting.

•

RAW protocol

Enables/disables RAW printing.

•

LLMNR

176

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands